How To Clean Hard Drive And Install Windows 7

Windows 7 was hands downwards the nigh popular operating system. Since Windows 10 is relatively new and has had its share of bugs and incompatibility, Windows vii is still being used past millions of people every bit an culling. This ways that people are withal actively ownership Windows 7 licenses and installing the operating system on their PC. However, there is a common problem where the Windows 7 setup does non recognize the hard drive that yous desire to install into. All you encounter on the setup is a blank list box when it comes to choosing a drive to install into. There is too a vague bulletin preceded by an assertion in a yellow triangle stating "No drivers found Click load driver to provide a mass storage commuter for installation." This article will explore this problem, requite the reasons why it occurs and finish off by giving yous working solutions to the problem.

Why Windows 7 Setup cannot detect your hard drive

In order to read the hard bulldoze, Windows must have the motherboard storage controller drivers, unlike the BIOS setup. Windows setup usually loads all the hard disk drive drivers just if your motherboard was unveiled afterward the release of Windows vii, then at that place is a likelihood that your drivers are not loaded hence the difficult disk cannot be detected. You might encounter the hard bulldoze in the BIOS setup only the Windows setup will not be able to find it.

Another common reason why your hard drive cannot be detected in the volume file format. Windows usually read NTFS file format, so if your hard disk is new or was previously used in Ubuntu, Mac or Linux, there is a possibility that its file format is unreadable by the Windows setup.

The motherboard and difficult drives also connect in different ways (dictated by the motherboard storage controller) which determines how data is exchanged to and from the drive and the interface that is used in BIOS. This includes EFI/UEFI, SATA/IDE, SATA/ATA, SATA/AHCI, and SATA/RAID. Using the wrong connection protocol tin lead to a conflict hence your hard drive will not be detected by the BIOS and by Windows setup.

Below is how you tin resolve this issue. Start with this method 3, iv & 5 if your BIOS is not able to detect your hd.

Method 1: Format/Clean the Difficult drive using 'diskpart' in control prompt

If your hard bulldoze is detected past BIOS then using the "clean" command will format the hard drive and ready the NTFS file format. You volition lose any data that was saved in the hard disk so utilize this method if you are admittedly sure you don't need the data in the hard drive.

1. Insert your Windows 7 bootable disc or USB and restart your computer.
2. Printing F12 to bring up the boot device options and choose the USB or DVD/RW (whichever has your Windows 7 setup)
3. A screen will come up asking yous to printing any key to kick from DVD/RW or USB. Press whatever central to boot up Windows 7 setup.
4. When the welcome screen comes up on Windows Setup, press Shift + F10, which volition brandish a command prompt (similar to choosing a language > Repair > Command Prompt)
5. Type "diskpart" (no quotes) and press enter.
6. Type "list deejay" and press enter.
7. Hopefully, you can see your drive in the list. Yous should run across a number identifying it. Now type "select disk X" (where 10 is the number identifying your bulldoze) and press enter.
8. Type "clean" and printing enter. This will write a blank MBR, you will lose whatsoever data on the hard drive if yous did accept anything on it.
9. No retry installing Windows 7

Alternatively, remove your HDD, slave it to a machine that already has Windows and format the drive using an NTFS file organisation. When finished, fix the HDD back on your machine and start your win7 installation.

Method two: Load the difficult drive storage controller drivers from a USB into the Windows setup

If your SATA/storage controller is newer than your Windows 7 version, then this method will load the missing storage controller drivers needed to detect your hard disk.

1. Working from another PC, download the hard drive host/storage controller drivers from your motherboard manufacturer, or from your PC manufacturer website (bold you take not changed the motherboard that came with your computer)
2. Extract the zip file into your USB bulldoze (if it a .exe file, add together a .null file at the end and extract to your USB)
3. Insert your Windows 7 bootable disc and the USB bulldoze into the PC with the installation problem and restart it.
4. Press F12 to bring upward the kicking device options and choose the USB or DVD/RW (whichever has your Windows seven setup)
5. A screen will come request you to press any key to boot from DVD/RW or USB. Press any cardinal to boot up Windows 7 setup.
6. When the welcome screen comes up on Windows Setup, choose a linguistic communication and click adjacent
7. Accept the license and terms so click adjacent
8. Select the Custom (avant-garde) installation
9. Windows will inquire you where you desire to install the Os only there won't be annihilation in the list.
10. Click the 'load driver' link at the left bottom of the Window.
11. If y'all receive a bulletin box asking yous to plug in the device with your drivers, click on "OK" (or click Cancel and and then Browse… to manually search for the commuter. Yous take to pinpoint the commuter for this case. If necessary, close the alarm nigh no suitable drivers, and uncheck the Hibernate drivers… checkbox)
12. Browse to the correct drive alphabetic character and location for the USB drive and click OK
13. One time the driver is constitute, y'all volition be prompted to select the controller from the listing. Brand sure it is selected and click Adjacent:
14. The hard drive will now exist shown and fix to begin the Windows 7 installation: cull a drive and click "Side by side" to go along with your installation.

Method 3: Change the boot controller way in BIOS

This method will help if your BIOS cannot detect the difficult bulldoze. By changing to the correct BIOS interface and data exchange mechanism, the Windows 7 setup will exist able to notice your hard drive. You have the option of EFI/UEFI or SATA that has four kick modes (ATA, RAID, IDE, AHCI).

1. Switch off your PC and restart information technology
2. Quickly press F2 or F10 to boot into BIOS
3. Become to the "Avant-garde" tab and scroll down to "SATA Mode."
4. Printing enter and choose a style. Go to leave and go out after saving changes. Restart and check if your HDD is at present detected by the BIOS. Practice this until it is detected.

If you are using RAID on your computer, modify information technology to AHCI or IDE. Otherwise, just modify whatsoever controller is selected and check to encounter if the result persists. After doing so, format the disk using the first method or you tin also use Acronis Truthful Paradigm to consummate the formatting process.

UEFI motherboard might miss this option since they only have one type of storage controller protocol. Note that this method and the controller fashion options might be different for unlike computers. You tin get the controller style nether "Host controller" "IDE Configuration" "SATA configuration" or something similar.

Method four: Reset BIOS

If you inverse the storage controller configuration due to an update of any sort, yous could attempt resetting your BIOS.

1. Switch off your PC and restart information technology
2. Rapidly press F2 or F10 to kicking into BIOS
3. Go to the "get out" tab and select "Restore Defaults."
4. Select "Yes" in the warning message and get out after saving changes

Method five: Employ a different SATA port

If y'all are using a desktop reckoner, try using a unlike SATA port and encounter if that helps at all. Sometimes they come up with two dissimilar controllers.

Note: Sometimes, copying the Kicking Folder from the Windows install Disk to the USB drive fixes this particular issue and so yous tin take a go at that.

Kevin is a dynamic and self-motivated it professional, with a Thorough knowledge of all facets pertaining to network infrastructure design, implementation and administration. Superior record of delivering simultaneous large-calibration mission disquisitional projects on time and under budget.

Source: https://appuals.com/fix-no-hard-drives-found-windows-7-installer/

Posted by: gandhioundiciat.blogspot.com

Share this post